Dehumidifier for Swimming Pool in Dubai UAE.

It is often observed that indoor swimming pool room is always humid which make user very uncomfortable. Not only that this high humidity environment start damaging infrastructure of indoor pool room. Dehumidifier for swimming pool helps to reduce humidity from room. CtrlTech offers different types of swimming pool dehumidifiers. It includes floor mount type, ceiling mount type, duct dehumidifiers and wall mount units.

Why you need dehumidifier for swimming pool?

Indoor swimming pool area consist of pool water surface. When there is temperature difference between pool water temperature and room air temperature, evaporation happens from pool water surface area. This evaporation mix into air and humidity of room air gets increase. High humidity in indoor swimming pool area can create:

• Uncomfortable environment for occupants.
• Bad smell from carpet and cloths.
• Development of  mold & fungus.
• Pilling of wall paint & black spots of wall.
• Swelling of wooden furniture and doors.
• Condensation on floor, ceiling and glass windows. 

Due to mold and fungus can create allergies. Hence it is important to install pool dehumidification system to remove this humidity.

Different indoor pool room dehumidifiers offered by CtrlTech.

CtrlTech offers wide range of indoor swimming pool dehumidifiers. These included portable type, wall mount and duct type.

SPD-136L Duct dehumidifier for swimming pools.

SPD series is ceiling or wall mount unit which can be connected to HVAC duct also. This unit has extraction capacity of 136 liters per day. Unit can easily install above fall ceiling due to its compact size. To install unit user need to connect single phase power supply and drain point. Unit is provided with wall mount LCD controller. From this controller user can on/off unit & set required humidity.  Controller is provided with special socket witch which user can easily connect controller to main unit. Rotary compressor with R410 refrigerant gas make this unit very efficient. As mentioned before unit can install in six different ways. It can also use for fresh air intake or can be connected in parallel to duct. Unit is provided with holes to hang unit easily from ceiling. Basic filter is provided at intake of air. This filter can be easily removed and clean. Unit can be install popularly as wall mount or ceiling mount.

BUY SPD-136L POOL DEHUMIDIFIER

WATCH YOUTUBE VIDEO OF SPD-136L

FSD-240L Floor mount dehumidifier for indoor swimming pool.

FSD-240L is large capacity floor mounted dehumidifier which use for large swimming pools. This model is specially designed for indoor swimming pool with large hall like sport swimming pools. Unit designed with high airflow so as to dehumidify large space quickly. Dehumidification capacity of this model is 240 liters per day. Unit is floor mount type with four wheels. Two front wheels are lockable so as to avoid free moment of unit. This commercial grade dehumidification system consist of rotary compressor with environmental friendly refrigerant gas. Unit require 3 phase power supply. Intake of air with humidity is from front side and dry air delivery from top. Drainage point is on left side of unit. Control panel installed on front panel of FSD-240L dehumidifier for indoor swimming pool. From this control panel user can see current room temperature and room humidity. Also user can set required humidity level or set to run unit into certain operation mode.

BUY FSD-240L LARGE DEHUMIDIFIER

WATCH YOUTUBE VIDEO OF FSD-240L

 

Wall Mount Dehumidifier for pool humidity control.

Wall mounted dehumidifier are most suitable for small swimming pools in residential villa.There is limitation on higher extraction capacity of wall mount unit. CtrlTech offers wall mounted dehumidifier up to 70 liters per day capacity. Wall mount units are easy to install. It need only single phase power supply and drainage connection. Unit provided with wall mount bracket with which unit can hang easily. Suction or humid pool air from bottom and discharge from top. Unit provided with basic control panel. Unit also has built in hygrometer which shows room humidity continuously. Also facility of adjustable humidity available. Unit will stop automatically when room humidity reduce to set humidity.Other than elegant look, one of the major advantage of wall mount unit is that it is very easy to install and it needs no maintenance.Contact CtrlTech team for site study to suggest you right capacity of unit.

BUY WMD WALL MOUNT DEHUMIDIFIER

WATCH YOUTUBE VIDEO OF WMD

How to calculate swimming pool dehumidifier capacity?

To calculate indoor pool room dehumidifier sizing we need to know following six factors:

1. Length and width of swimming pool to calculate water surface area.
2. Length, width and height of indoor pool room to calculate room volume.
3. What is maximum setting of pool water temperature
4. What is lowest room temperature setting.
5. Type of swimming pool to consider activity factor. Type of pool can be residential private pool, hotel apartment pool, school pool, sport complex pool etc. Different type of pool have different use hours and occupants which will effect evaporation from pool.
6. From site study we need to decide that which type of dehumidifier will be suitable for that particular room. If pool is small then you can go for wall mount type. But if user do not want wall mount then we need to check if there is space above false ceiling to install duct unit. Or if pool room is very large then it will be better to go for floor mount type unit.

Unit above date you can calculate dehumidifier capacity online from any site.

Which factors affects swimming pool dehumidifier capacity calculation?

As mentioned in previous section there are above six factor we need to calculate dehumidifier size. lets see how these factors affects calculation.

Swimming pool surface area: Evaporation rate is directly proportional to water surface area of pool. Bigger the pool then more will be evaporation and you will end up calculating bigger size dehumidifier unit. 

Room Volume: Room volume considerably effect size of unit. If pool room is big then we need to take care that either dehumidifier should selected with high airflow or we need to select multiple dehumidifiers of smaller capacity.

Swimming Pool Water temperature: Evaporation rate from pool water surface directly proportional to pool water temperature. If pool water temperature high then temperature difference between pool water temperature and room air temperature will be more hence evaporation rate will be more. Faster evaporation rate will generate more humidity and hence capacity of dehumidifier will increase.

Room Temperature: Lower room temperature will be make condensation dehumidifier capacity lower.  Also low room temperature will increase temperature difference between room air temperature and pool water temperature and hence evaporation rate will increase.

Type of swimming pool: This is one of the major factor to decide capacity calculation. Evaporation rate also depend on for how many hours pool get use and how many maximum number of people using pool at any giving time. For More people using pool will increase humidity due to evaporation from body of occupant. Hence base on type of pool we need to consider activity factor. For example activity factor for private pool is 0.5 since it get use by less people and for for few hours. While activity factor for sport complex pool or hotel pool will be 1 since it will be in use continuously by many people.

Where you can buy swimming pool dehumidifier in UAE?

Buying right dehumidification system for you pool is very important job. In UAE, there is no other professional supplier than CtrlTech dehumidifiers. They are one stop shop for all kinds of unit which includes pool dehumidifier, home dehumidifier and industrial dehumidifier. You can reach CtrlTech easily on +971 6 5489626 or visit www.dehumidifier.ae. For swimming pool unit, CtrlTech offers free site study and submit you quotation free of cost. They will suggest of right type of unit suitable for your indoor pool. They offer one year warranty on all products.

What are types of Indoor pool dehumidifiers?

Pool dehumidifying unit are basically divided on basis of type of mounting. Major three types are as follow:

Portable Dehumidifier: This are industrial grade unit with wheels. It is very suitable for temporary dehumidification at pool area. Generally these type of unit user do not prefer.

Duct Dehumidifier: This unit are most commonly used. These unit can easily suspend from ceiling and install between ceiling and false ceiling with inlet and outlet louver on false ceiling. These unit also can be connected to HVAC duct. These unit need major installation job hence these type of unit should consider at time of construction of swimming pool itself. Installing these unit on existing pool will be major job.

Wall mount Unit: As mentioned before these unit suitable for small pool which are already in use and user want to avoid major installation work. Unit provided with wall mount bracket with help of this unit can easily hang on wall.

Floor mount dehumidifier: This type unit proffered when swimming pool hall is very big in area and has tall ceiling. This type of site required dehumidifier with high airflow so at to dehumidify this large space since humidity continuously get generated by swimming pool water. CtrlTech offers FSD series floor mounted unit.

What are five features that indoor pool dehumidification system should have?

Most commonly in indoor swimming  pool duct type units are get use. We are going to list down five features that every pool dehumidifier should have.

Controller: Unit should have fitted controller or wall mount wired controller. This controller enables user to on/off unit, set required humidity level, set working modes and choose fan speed. Controller should have LED/LCD display which should show current room humidity continuously.

Working Sound: This is very important factor since unit going to installed in recreation area. Annoying sound can disturb user. Hence we need to make sure that unit should have minimum working sound possible.

Corrosion proof body: Unit always subject to high humid air from inside and outside. Hence unit body should be powder coat painted with corrosion proof paint to protect unit from corrosion.

Mode of Mounting: Ideal pool dehumidifier should be able mount in different modes. For example SPD-136L series can be wall mounted , it can be ceiling mounted. It can be connected to HAVC duct or it can be connected individual without connecting any duct.

Principle of working: It is wrong practice (especially in middle east) to install desiccant dehumidifier for swimming pool area. By doing this initial cost and running cost of unit get increase. It is not required to install desiccant machine for swimming pool in hot country like UAE, Saudi Arabia, Oman, Qatar and Kuwait. Desiccant dehumidifier special use when one like to do de-humidification at lower temperature like in cold storage. In European countries, temperature always less than 10 deg C hence in those places if we use refrigerant based dehumidifier then ice will form on coil and unit will stop working. Hence in European countries you can use desiccant type unit for swimming pool but for Middle Eastern countries it is wise to use condensation dehumidifier.